The Audio tab controls the volume and output level of the Core Tap's built-in audio playback. Audio files are stored on the SD card and selected per-event in the Tap Actions tab.
| Setting | Description |
|---|---|
| Master Volume | Sets the overall playback level from 0% (muted) to 100% (full volume). This is the primary volume control for day-to-day use. |
| Setting | Description |
|---|---|
| Analog Gain | A hardware-level output stage adjustment. 0 dB (Normal) is the default and suitable for most installations. Select -6 dB (Attenuated) if the audio output is too loud even at low software volume settings - for example, when driving a high-sensitivity speaker directly. |
The bottom of this tab shows whether the audio hardware was detected at startup and which chip is in use. This is read-only and is useful when troubleshooting audio issues.
Click Save to apply changes. Click Refresh to reload the current device values.
Audio files must be placed on the SD card before they appear in the Tap Actions file selector. Use the File Manager tab to upload files from your computer.
Supported formats and recommended settings: